RIP (Latihan)

RIP

Kasus:

Konfigurasikan jaringan dibawah ini!

Sehingga Menjadi:

Jawab:

Ikuti langkah-Langkah berikut

1. Konfigurasi Router

Router LAB A

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname LAB_A

LAB_A(config)#int se 2/0

LAB_A(config-if)#ip add 201.100.11.2 255.255.255.0

LAB_A(config-if)#clock rate 9600

LAB_A(config-if)#no sh

LAB_A(config-if)#exit

LAB_A(config)#int fa 0/0

LAB_A(config-if)#ip add 192.5.5.1 255.255.255.0

LAB_A(config-if)#no sh

LAB_A(config-if)#exit

LAB_A(config)#int fa 1/0

LAB_A(config-if)#ip add 205.7.5.1 255.255.255.0

LAB_A(config-if)#no sh

LAB_A(config-if)#exit

%SYS-5-CONFIG_I: Configured from console by console

LAB_A#write mem

Building configuration...

[OK]

Router LAB B

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname LAB_B

LAB_B(config)#int se 3/0

LAB_B(config-if)#ip add 201.100.11.2 255.255.255.0

LAB_B(config-if)#no sh

LAB_B(config-if)#exit

LAB_B(config)#int se 2/0

LAB_B(config-if)#ip add 199.6.13.1 255.255.255.0

LAB_B(config-if)#clock rate 9600

LAB_B(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

LAB_B(config-if)#

LAB_B(config-if)#exit

LAB_B(config)#int fa 0/0

LAB_B(config-if)#ip add 219.17.100.1 255.255.255.0

LAB_B(config-if)#no sh

LAB_B(config-if)#exit

%SYS-5-CONFIG_I: Configured from console by console

LAB_B#write mem

Building configuration...

[OK]

ROUTER LAB C

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname LAB_C

LAB_C(config)#int se 2/0

LAB_C(config-if)#ip add 199.6.13.2 255.255.255.0

LAB_C(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

LAB_C(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

LAB_C(config-if)#exit

LAB_C(config)#int fa0/0

LAB_C(config-if)#ip add 223.8.151.1 255.255.255.0

LAB_C(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LAB_C(config-if)#exit

LAB_C(config)#interface Serial3/0

LAB_C(config-if)#ip address 204.204.7.1 255.255.255.0

LAB_C(config-if)#clock rate 9600

LAB_C(config-if)#no sh

%LINK-5-CHANGED: Interface Serial3/0, changed state to down

LAB_C(config-if)#exit

%SYS-5-CONFIG_I: Configured from console by console

LAB_C#write mem

Building configuration...

[OK]

ROUTER LAB_D

Router#en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname LAB_D

LAB_D(config)#int se 2/0

LAB_D(config-if)#ip add 204.204.7.2 255.255.255.0

LAB_D(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

LAB_D(config-if)#exit

LAB_D(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

LAB_D(config)#int fa 0/0

LAB_D(config-if)#ip add 210.93.105.1 255.255.255.0

LAB_D(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LAB_D(config)#exit

LAB_D#

%SYS-5-CONFIG_I: Configured from console by console

LAB_D#write mem

Building configuration...

[OK]

ROUTER LAB E

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname LAB_E

LAB_E(config)#int fa0/0

LAB_E(config-if)#ip add 210.93.105.2 255.255.255.0

LAB_E(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LAB_E(config-if)#exit

LAB_E(config)#exit

LAB_E#

%SYS-5-CONFIG_I: Configured from console by console

LAB_E#write mem

Building configuration...

[OK]

2. Seteleh Serial dan Fastethernet terkonfigurasi, kita memasuki tahap yang selanjutnya yaitu mengkoneksikan router-router tersebut dengan IP Route.

IP ROUTE LAB A

LAB_A(config)#ip route 219.17.100.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 199.6.13.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 223.8.151.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 204.204.7.0 255.255.255.0 201.100.11.2

LAB_A(config)#ip route 210.93.105.0 255.255.255.0 201.100.11.2

LAB_A(config)#^Z

LAB_A#

%SYS-5-CONFIG_I: Configured from console by console

LAB_A#write mem

Building configuration...

[OK]

IP ROUTE LAB B

LAB_B(config)#ip route 205.7.5.0 255.255.255.0 201.100.11.1

LAB_B(config)#ip route 192.5.5.0 255.255.255.0 201.100.11.1

LAB_B(config)#ip route 223.8.151.0 255.255.255.0 199.6.13.2

LAB_B(config)#ip route 204.204.7.0 255.255.255.0 199.6.13.2

LAB_B(config)#ip route 210.93.105.0 255.255.255.0 199.6.13.2

LAB_B(config)#^Z

LAB_B#

%SYS-5-CONFIG_I: Configured from console by console

LAB_B#write mem

Building configuration...

[OK]

IP ROUTE LAB C

LAB_C(config)#ip route 219.17.100.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 201.100.11.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 192.5.5.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 205.7.5.0 255.255.255.0 199.6.13.1

LAB_C(config)#ip route 210.93.105.0 255.255.255.0 204.204.7.2

LAB_C(config)#^Z

LAB_C#

%SYS-5-CONFIG_I: Configured from console by console

LAB_C#write mem

Building configuration...

[OK]

IP ROUTE LAB D

LAB_D(config)#ip route 223.8.151.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 199.6.13.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 219.17.100.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 201.100.11.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 192.5.5.0 255.255.255.0 204.204.7.1

LAB_D(config)#ip route 205.7.5.0 255.255.255.0 204.204.7.1

LAB_D(config)#^Z

LAB_D#

%SYS-5-CONFIG_I: Configured from console by console

LAB_D#write mem

Building configuration...

[OK]

IP ROUTE LAB E

LAB_E(config)#ip route 204.204.7.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 223.8.151.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 199.6.13.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 219.17.100.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 201.100.11.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 192.5.5.0 255.255.255.0 210.93.105.1

LAB_E(config)#ip route 205.7.5.0 255.255.255.0 210.93.105.1

           

LAB_E(config)#^Z

LAB_E#

%SYS-5-CONFIG_I: Configured from console by console

LAB_E#write mem

Building configuration...

[OK]

3. Memberikan IP Address pada Semua PC

PC-0

IP Address : 205.7.5.2

Subnet Mask: 255.255.255.0

Default Gateway: 205.7.5.1

PC-1
IP Address : 205.7.5.3

Subnet Mask: 255.255.255.0

Default Gateway: 205.7.5.1

PC-2

IP Address : 192.5.5.2

Subnet Mask: 255.255.255.0

Default Gateway: 192.5.5.1

PC-3

IP Address : 192.5.5.3

Subnet Mask: 255.255.255.0

Default Gateway: 192.5.5.1

PC-4

IP Address: 219.17.100.2

Subnet Mask : 255.255.255.0

Default Gateway : 219.17.100.1

PC-5

IP Address: 219.17.100.2

Subnet Mask : 255.255.255.0

Default Gateway : 219.17.100.1

PC-6

IP Address : 223.8.151.2

Subnet Mask: 255.255.255.0

Default Gateway: 223.8.151.1

PC-7

IP Address : 223.8.151.3

Subnet Mask: 255.255.255.0

Default Gateway: 223.8.151.1

PC-8

IP Address : 210.93.105.4

Subnet Mask : 255.255.255.0

Default Gateway: 210.93.105.1

PC-9

IP Address : 210.93.105.3

Subnet Mask: 255.255.255.0

Default Gateway: 210.93.105.1

4. Mengecek Koneksi Semua Jaringan

Kita ketikkan sh ip route.

Syntaq:

LAB_A#sh ip route

 

Lakukan hal sama pada semua router

5.    Pembuktian.

Pembuktian router

Kita ketikkan ping <IP Router>

 

Pembuaktian pada PC

Kita masuk command promp lalu ketik ping <IP Address>

Silahkan Klik to Download

(Yang mo ngetag and ngeshare, silahkan)